We’re moving to a new warehouse. Some orders may take longer than usual until 27 November. Thank you for your patience.

  • MCS Approved Products
  • Next Working Day Delivery*
  • UK Stock
0800 193 6010Mon – Fri 9am – 5pm
Tesla Powerwall 3 mounted on the outside wall of a home - ClearRaySolar

Tesla Powerwall 3 Expansion Pack Guide: How Many and Which Kit

How the Tesla Powerwall 3 Expansion Pack works, how many you can add to one Powerwall 3, which kit and harness to order, and when a second Powerwall 3 makes more sense.

· ClearRay Solar · 5 min read

The Tesla Powerwall 3 Expansion Pack lets one Powerwall 3 hold far more of your solar for the evening, without adding a second inverter. Here is how many you can add, which kit to order, and when a second Powerwall 3 is the better buy.

At a glance

13.5 kWhUsable storage in each Expansion

Up to 3Expansions in one system

54 kWhOne Powerwall 3 with three Expansions

IP67Fit it indoors or outdoors

  • Works only with Powerwall 3, and has no inverter of its own.
  • Stack it on the floor behind the Powerwall 3, or hang it on a wall.
  • Charging speeds up too: up to 8 kW with Expansions, up to 5 kW without.

What is the Powerwall 3 Expansion Pack?

The Powerwall 3 is a battery and a hybrid inverter in one unit. The Expansion is just the battery half: the same 13.5 kWh of usable energy in a slimmer case, with no inverter and no solar inputs. It plugs into the Powerwall 3, or into another Expansion, with a Tesla expansion harness and works alongside it.

More storage also means faster charging. Tesla rates a Powerwall 3 on its own at up to 5 kW of continuous charging, rising to up to 8 kW (AC and DC) once Expansions are fitted, so a bigger system also charges faster than a Powerwall 3 alone.

Bar chart: one Tesla Powerwall 3 stores 13.5 kWh on its own, 27 kWh with one Expansion, 40.5 kWh with two and 54 kWh with three
Storage grows 13.5 kWh at a time. One Powerwall 3 with all three Expansions holds 54 kWh. Source: Tesla Powerwall 3 datasheet (Powerwall 3 and Expansion specifications).

How many Expansions can you add?

Tesla allows up to three Expansions in a system, alongside up to four Powerwall 3 units: seven units in total. So a single Powerwall 3 with three Expansions holds 54 kWh, and the largest system, four Powerwall 3 units with three Expansions, stores 94.5 kWh.

Stacked or wall-mounted: which kit?

The Expansion comes three ways on our Expansion page: on its own, with a stacking kit, or with a wall-mounting kit. Pick the layout first and the right option follows.

Diagram of the two ways to fit a Powerwall 3 Expansion: stacked on the floor behind the Powerwall 3 with a 0.5 m harness, or hung on a wall further away with a 0.5, 2 or 4 m harness
Two layouts, two kits. A stack sits directly behind the Powerwall 3; a wall-hung Expansion can sit further away.

Stacked on the floor

The neatest install, directly behind the Powerwall 3

  • Up to three Expansions in the stack
  • Floor-mount only
  • Connects with the 0.5 m harness
  • Order “With stacking kit”: kit and harness included

Hung on a wall

When the Expansion needs to sit further away

  • Wall bracket and glass front cover
  • Harness ordered separately: 0.5 m, 2 m or 4 m
  • Measure the run before you order
  • Order “With wall-mounting kit”
Plan the wall for the weight

An Expansion weighs 110 kg on its own and 118.5 kg once wall-mounted with its glass cover and bracket, and measures 1105 × 609 × 168 mm. No wall anchors are listed in the kit, so take the fixings from Tesla’s installation manual.

Expansion or a second Powerwall 3?

Both add 13.5 kWh, but they solve different problems.

Add an Expansion

You run out of stored energy in the evening

  • Adds storage only
  • The first Powerwall 3 still does the converting, at up to 11.04 kW AC
  • Your array already suits the first unit

Add a second Powerwall 3

You are adding panels or want more power at once

  • Adds storage and its own inverter
  • Brings more solar inputs: Tesla quotes up to 20 kW of solar (STC) on three MPPTs per unit
  • Suits a bigger array or heavier loads

What does a Powerwall 3 Expansion cost?

Supplier prices move, so we show them live rather than printing a figure that would soon be wrong. These are today’s prices, ex VAT:

Powerwall 3 Expansion PackView product Tesla Powerwall 3View product Expansion Stacking KitView product Expansion Wall Mounting KitView product

Installing it

A job for your installer

The Expansion and its harness are part of the battery’s DC connection, so have it fitted by an installer following Tesla’s Powerwall 3 installation manual. It runs between 52 V and 92 V DC, is not field serviceable, and is certified to IEC 62619, IEC 62933-5-2 and IEC 61000-6-1/-3.

Powerwall 3 Expansion questions

Can an Expansion run without a Powerwall 3?

No. It is a DC battery with no inverter of its own, so it needs a Powerwall 3 to charge and discharge.

Does it work with Powerwall 2?

No. Tesla’s datasheet lists the Expansion as compatible only with Powerwall 3.

How many Expansions can I add?

Up to three in a system. With one Powerwall 3, three Expansions take the system to 54 kWh of storage.

Can stacked Expansions go on a wall?

No. Stacking is floor-mount only. For a wall position, use the wall-mounting kit (1978069-00-C).

Can it go outside?

Yes. It is rated IP67 and for −20 °C to 50 °C, indoors or out.

Ready to add storage to your Powerwall 3?See all three Expansion options with today’s price and stock.

See the Expansion PackShop all Tesla

Sources

  1. Tesla Powerwall 3 datasheet (Expansion technical specifications page), on the Documents tab of our Expansion page.
  2. Tesla, Powerwall 3 datasheet (UK): energy scalability, charge power and system size.
  3. Tesla parts lists for the stacking kit (1978070-00-B), wall-mounting kit (1978069-00-C) and expansion harnesses (1875157-05-D, -20-D, -40-D).