Sunsynk Long Cable Set for Battery to Inverter

Sunsynk Long Cable Set for Battery to Inverter is a battery cable set — 1,500 mm for connecting a Sunsynk battery to its inverter.

Battery cable is not ordinary cable. The DC side of a storage system runs at low voltage and high current, so conductor size is set by current and by acceptable voltage drop rather than by the load in watts, and the connection has to survive years of thermal cycling without the termination loosening. Undersized or badly terminated battery cable is one of the few faults in a solar installation that can start a fire rather than simply stop working.

Which is why these are sold as made-up assemblies of a stated length and polarity: the manufacturer has already decided the conductor size, the terminal and the crimp for the battery it belongs to.

What is in the pack

• Inverter to battery cable set, 1,500 mm

Specification

This is a made-up assembly rather than a catalogue cable, so the manufacturer does not publish a separate datasheet for it. The conductor size, terminals and crimps are chosen by the manufacturer for the battery it belongs to. Ask us if you need a figure that is not listed here and we will get it from them rather than guess.

Additional suggested items

A battery cable is rarely ordered on its own:

• Battery to Battery Cable Pack Medium for Sunsynk — the shorter battery-to-battery pack
• Sunsynk 5.12kWh Single Battery Unit for HV Series — the battery module these cables connect

Any datasheets and manuals we hold are in the Documents tab below. See the rest of our battery cable range and our batteries, or contact our sales team at sales@clearraysolar.com if you are not sure which set your battery takes.