16 IN STOCKReady for immediate dispatch
Pylon Force-H3 High Voltage System stack of 7 incl. BMU (35.8 kWh)
Pylontech Pylon Force-H3 High Voltage System stack of 7 incl. BMU (35.8 kWh)
Pylon Force-H3 High Voltage System stack of 7 incl. BMU (35.8 kWh)
Pylontech Force H3 high voltage stack — 5.12 kWh a module, 95 % usable, and a stack that runs from 10.2 kWh to 35.8 kWh.
A home battery stores the solar your house does not use at the moment it is generated, and gives it back in the evening. What decides whether that is worth doing is not the headline capacity but three numbers together: how much of the pack you may actually use, how fast it will charge and discharge, and how many cycles it is good for.
Please read before ordering
| 7 x PYL-F-H3-BATT | Pylontech Force H3 5.12kWh High Voltage Battery Module | |
| 1 x PYL-F-H3-BMU-BASE | Pylontech Force H3 BMU with base and cables | |
About the Pylontech Force H3 high voltage stack
The Force H3 is Pylontech's high-voltage answer. Each FH10050 module is 102.4 V and 5.12 kWh, and two to seven of them stack into a system from 10.2 kWh to 35.8 kWh at 204.8 to 716.8 V. Higher voltage means lower current for the same power, which means thinner DC cable and less resistive loss than a 48 V bank doing the same job.
Charge and discharge is 50 A recommended and 52 A maximum, whatever the stack height — so a taller stack does not charge faster, it charges longer. Up to six systems run in parallel where more is needed.
IP55, so it tolerates a garage or a sheltered outdoor position better than a rack module, and it talks CANBUS or Modbus RTU.
What each stack size gives you
A Force H3 stack is two to seven modules. These are the sizes:
Which inverter will run this battery?
This is a high-voltage stack, 204.8 to 716.8 V depending on how many modules are in it.
High-voltage hybrids only. Solis list the Force H3 on their HV compatibility list, where the SolisCloud battery option is PYLON_HV, and it suits other high-voltage platforms with a window wide enough for the stack you build. It cannot be used on a 48 V low-voltage inverter under any circumstances.
Hybrid inverter platforms in our range that take this architecture:
Inverters we stock that will run it:
Stack rules, cabling and what else the job needs
The details that decide whether this battery suits the system:
- Module is the FH10050: 102.4 V, 50 Ah, 5.12 kWh. A stack is two to seven modules plus the BMU.
- System voltage by stack height: 204.8 V at two modules rising to 716.8 V at seven. Check that against the inverter's battery window before you decide the stack height.
- Charge and discharge current is 50 A recommended, 52 A maximum, regardless of stack size.
- Depth of discharge 95 %. Cycle life over 8,000 at 25 °C, design life 15+ years.
- Up to six systems in parallel.
- 540 × 350 mm footprint; height and weight rise with the stack, from 530 mm and 92 kg at two modules to 1,380 mm and 287 kg at seven.
- IP55, working temperature −10 to +50 °C, shelf −20 to +60 °C, altitude below 4,000 m.
- CANBUS or Modbus RTU to the inverter.
Where this battery earns its place
The Force H3 high voltage stack is specified most often for these jobs.
Pylontech 7 modules technical data
Questions we get asked about this inverter
Will it work with my inverter?
Only with a high-voltage hybrid whose battery window covers the stack voltage you are building — 204.8 V at two modules up to 716.8 V at seven. Solis list it as Force-H3 with the option PYLON_HV. It will not work on a 48 V inverter.
Does a bigger stack charge faster?
No. Charge and discharge current is 50 A recommended and 52 A maximum whatever the stack height, so a taller stack stores more but fills at the same rate.
How much is usable?
95 % of the nominal figure — 9.7 kWh of a 10.2 kWh stack, 34 kWh of a 35.8 kWh one.
Can it go outdoors?
It is IP55, which suits a garage or a sheltered position. Full exposure to weather still needs an enclosure.
How many systems can I parallel?
Up to six.
Documents, advice and trade pricing
Every datasheet, certificate, installation manual and warranty document we hold for this product is in the Documents tab below. See the rest of our battery range, our hybrid inverters and our solar panels, or email sales@clearraysolar.com if you would like us to check a battery and inverter pairing before you order.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
- Protection Devices
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.
