DMEGC Solar 585W N-type Bifacial Double Glass Silver Frame Solar Panel
DMEGC Solar 585W N-type Bifacial Double Glass Silver Frame Solar Panel
The DMEGC Solar DMEGC Infinity is an N-type TOPCon solar panel. TOPCon cells add a passivated contact layer behind the silicon, cutting the recombination losses that limit older PERC modules. It delivers 22.6 % module efficiency from a 2,278 × 1,134 mm frame.
About the DMEGC Infinity range
DMEGC's Infinity range is a large-format bifacial TOPCon module for commercial rooftop and ground-mount arrays.
At 2,278 mm tall and 2.58 m² this is a commercial-format module, intended for warehouse and barn roofs, ground mounts and solar farms where the extra length is not a constraint. It is usually too long for a typical domestic roof plane. Being bifacial, it earns most of its extra yield on flat roofs, ground mounts and light-coloured surfaces, where light reaches the back of the module; on a pitched tiled roof the rear-side gain is small.
Why installers specify this panel
- −0.29 %/°C power temperature coefficient — output falls away more slowly as the modules heat up through the middle of the day.
- Bifacial, 80 % ±5 % — the rear face adds generation from reflected and diffuse light, which suits flat roofs, ground mounts and light-coloured surfaces.
- 0 to +3 % power tolerance — every module is sorted to meet or beat its 585 W nameplate rating.
Electrical characteristics (STC)
| Rated power (Pmax) | 585 W |
| Module efficiency | 22.6 % |
| Open-circuit voltage (Voc) | 52.70 V |
| Voltage at maximum power (Vmp) | 44.04 V |
| Short-circuit current (Isc) | 14.05 A |
| Current at maximum power (Imp) | 13.30 A |
| Power tolerance | 0 to +3 % |
| Power at BNPI | 647 W |
| Maximum system voltage | DC 1500 V (IEC) |
| Maximum series fuse rating | 30 A |
STC: AM1.5, 1,000 W/m², 25 °C cell temperature.
Mechanical specification
| Cell technology | N-type mono-crystalline |
| Number of cells | 144 (6 × 24) |
| Front cover | 2 mm heat-strengthened glass |
| Dimensions (H × W × D) | 2,278 × 1,134 × 30 mm |
| Weight | 31.8 kg |
| Junction box | 3 diodes, IP68 to IEC 62790 |
| Connector | PV-ZH202B / MC4-EVO 2 A (1500 V) |
| Cable | 4 mm² |
Temperature and load ratings
| Temperature coefficient of Pmax | −0.29 %/°C |
| Temperature coefficient of Voc | −0.25 %/°C |
| Temperature coefficient of Isc | +0.048 %/°C |
| Operating temperature | −40 °C to +85 °C |
| Nominal module operating temperature | 42 ±2 °C |
| Maximum test load | 5,400 Pa front / 2,400 Pa back |
| Maximum design load | 3,600 Pa front / 1,600 Pa back |
| Protection class | Class II |
Array sizing
Each panel covers 2.58 m². A 4 kWp array needs 7 of them (4.09 kWp over about 18 m²). A 6 kWp array needs 10 of them (5.85 kWp over about 26 m²). At 31.8 kg each they are a two-person lift.
About DMEGC Solar
DMEGC Solar is the photovoltaic arm of the Hengdian Group, with its European operation based in the Netherlands. Its n-type TOPCon modules are built to EN 50380.
Datasheets, installation manuals and warranty documents for the DMEGC Solar DMEGC Infinity are in the Documents tab below. Buying for a project? Contact our sales team at sales@clearraysolar.com for pallet pricing.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
- Protection Devices
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.
