Solis IntelliHome 10kWh low voltage battery (wall-mounted)
Product details
The SolisStorage range includes three different battery lines, all made with durable LiFePO4 (lithium iron phosphate) chemistry. These units are designed for longevity, supporting a depth of discharge (DoD) of 90% or more and delivering over 6,000 cycles, which corresponds to an average lifespan of 10 years.
IntelliHome (wall/floor mounting)
Maximum charge/discharge rate may be limited by inverter or battery depending on which has higher capabilities
If installing multiple batteries a combiner box or busbar will be required.
For more information about the product: Link
Please note that the first batch of these batteries are missing connectors required to connect battery to inverter. Installers will be required to source and crimp such connectors directly onto the power cable.
Inverter Connectors required:
S6-EH1P(3-10)K-L-PLUS - 2 x M8 OT Terminals
S6-EH3P(5-18)K02-NV-YD-L - 2 x M8 OT Terminals
S6-EH1P(12-18)K03-NV-YD-L - 2 x M8 OT Terminals
Attention: To ensure compatibility, any inverter manufactured before April 2026 will require a firmware update prior to commissioning with a SolisStorage battery. Further information can be found in the Solis document: "Solis - Intellihome compatibility - Inverter Firmware Upgrade SOP"
10 kWh in one unit
The IntelliHome 10 kWh doubles the 5 kWh's current as well as its capacity. It suits hybrids that need to run the house through the evening from one battery.
Which option to pick
Battery only
SOL-SBAT-R10K-L-WM-OD- You supply
- Power and comms cables
- Good for
- Adding to an existing stack
With accessory pack
SOL-SBAT-R10K-L-WM-OD-ACCPACK- In the box
- +/− power cables, 2 comms leads
- Terminals
- M8 fitted, 2 × M10 spare
- Good for
- A first battery on a new install
Choose "With accessory pack" at the top of the page and the battery arrives with its inverter cabling. That means the positive and negative power cables, the 2-core inverter comms lead and the 8-core Ethernet lead for linking batteries. There are also two M10 OT terminals and washers for inverters with M10 studs. Switch between the two options above to compare prices. The accessory pack is also sold separately, linked below, so you can see what the bundle saves.
Charge and discharge
Solis recommends 100 A (0.5C) for charging and discharging, and the maximum discharge is 200 A (1C). Charging tops out at 0.5C. The operating range is 44.8–57.6 V, and it communicates over CAN or RS485.
Pair with
-
Solis 10 kW single-phase LV hybrid
An S6-EH1P L-PLUS model, a range the IntelliHome datasheet lists as compatible.
-
Combiner box for parallel batteries
Its listing allows up to three IntelliHome 10 kWh units.
-
10 kWh accessory pack, sold separately
The same cables and terminals as the bundle, as a spare set.
10 kWh questions
90 kg, in a 470 × 1075 × 175 mm case (W × H × D). Plan a two-person lift.
It is IP66, uses natural convection and has smart heating, rated from −20 °C to 55 °C.
IEC 62619, IEC 63056, VDE 2510-50 and UN38.3, among others.
It has an SOC indicator and a status indicator on the unit.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.