We’re moving to a new warehouse. Some orders may take longer than usual until 27 November. Thank you for your patience.

  • MCS Approved Products
  • Next Working Day Delivery*
  • UK Stock
0800 193 6010Mon – Fri 9am – 5pm
Sigenergy SigenStor Neo Energy Controller Single Phase
Out of stock

Sigenergy SigenStor Neo Energy Controller Single Phase

SIG-STOR-NEO-EC-5.0-SP
£998.74 ex. VAT
Power: 5.0 kW
  • Secure Checkout
  • Tracked Delivery
High Conversion EfficiencyMore of your solar reaches the home
MPPT TrackingMaximises yield in changing light
Grid CompliantMeets UK G98 / G99 requirements

Sigenergy SigenStor Neo Energy Controller Single Phase

The SigenStor Neo Energy Controller is Sigenergy's single-phase hybrid inverter for home solar and battery systems. It puts the inverter, the energy management and a built-in backup gateway into one IP66 unit, so there are fewer boxes on the wall, less wiring between them and a quicker, tidier install than a conventional hybrid set-up.

Choose the power rating that suits your home – 5, 6, 8, 10 or 12 kW – then add SigenStor Neo battery modules: start with one and add more later, up to six per controller.

The Neo Energy Controller in figures

5–12 kWSingle phase
4 MPPTs1 string each
0 msBackup switchover
IP66Fanless, outdoor rated

Every size has four independent MPPT trackers, each taking one string at 40–565 V and up to 22 A, with a 600 V maximum input. The battery side runs at 300–600 V. European efficiency is 96.7%, with a 97.9% peak.

Backup built in

No separate gateway to buy

The backup gateway is inside the controller, with a 63 A grid pass-through and 0 ms switchover, so the backed-up circuits carry on through a power cut without a flicker. A Smart Port with a 2-wire start also lets a generator be brought in.

Building a SigenStor Neo system

  • This Energy Controller – pick the power rating above
  • Battery modules – the SigenStor Neo Battery 8.0 kWh (7.52 kWh usable). Up to six per controller, roughly 45 kWh in total
  • A mounting kit – the Neo ground-mount kit carries up to six modules; wall mounting carries up to three
  • A CT meter, so the system can see what the house is importing and exporting
  • Optional: the Sigen CommMod for 4G connectivity
  • There is no EV DC charging module option on the Neo range – that is on the original SigenStor

Built to live outdoors

IP66 with natural convection cooling – there are no fans to wear out or clog – and an operating range of −40 to +65 °C. The unit measures 800 × 360 × 235 mm and weighs under 27 kg. It connects over WLAN, Ethernet, RS485 and Bluetooth.

Protection includes AFCI arc fault detection, insulation and residual current monitoring, Type II DC and AC surge protection, anti-islanding, DC reverse polarity protection and PID recovery.

Part numbers
5.0 kWSIG-STOR-NEO-EC-5.0-SP
6.0 kWSIG-STOR-NEO-EC-6.0-SP
8.0 kWSIG-STOR-NEO-EC-8.0-SP
10.0 kWSIG-STOR-NEO-EC-10.0-SP
12.0 kWSIG-STOR-NEO-EC-12.0-SP

Questions about the SigenStor Neo

Which power rating do I need?

Size it to your array and your home's demand, and check what your DNO will allow: larger single-phase systems usually need G99 approval before connection rather than the simpler G98 notification. Your installer will confirm which applies.

Does it work with the original SigenStor batteries?

No. The Neo Energy Controller pairs with the SigenStor Neo battery modules, which stack on their own base and join with quick connectors.

Do I need a separate Sigenergy Gateway for backup?

No – the backup gateway is built into the Neo controller.

High Efficiency 96.7 %More power from the same roof space