We’re moving to a new warehouse. Some orders may take longer than usual until 27 November. Thank you for your patience.

  • MCS Approved Products
  • Next Working Day Delivery*
  • UK Stock
0800 193 6010Mon – Fri 9am – 5pm
Sigenergy SigenStor Neo Battery 8.0 kWh
Out of stock

Sigenergy SigenStor Neo Battery 8.0 kWh

SIG-STOR-NEO-BAT-8.0
£1,722.60 ex. VAT
  • Secure Checkout
  • Tracked Delivery
Store Your SolarUse free power after dark
Long Cycle LifeThousands of charge cycles
Managed & ProtectedBuilt-in battery management system

Sigenergy SigenStor Neo Battery 8.0 kWh

The SigenStor Neo BAT 8.0 is the stackable lithium iron phosphate battery for the SigenStor Neo Energy Controller. Each module gives 7.52 kWh of usable storage, and modules stack on a common base and join with quick connectors, so the system can start small and grow.

Up to six modules go on one controller, for around 45 kWh in total. It offers about 25% more energy per module than the Neo BAT 6.0, so fewer modules reach the same capacity.

The module in figures

7.52 kWhUsable per module
100%Depth of discharge
4.8 kWContinuous discharge
IP66Outdoor rated

All of the stated capacity is usable, with no reserve held back. Discharge is 4.8 kW continuous with a 6 kW peak for 10 seconds, and the cell manufacturer rates it at up to 10,000 cycles.

Choosing your stack size

  • One or two modules – about 7.5 to 15 kWh: overnight running for a typical home
  • Three or four modules – about 22.5 to 30 kWh: a time-of-use tariff charging overnight and covering most of the next day
  • Five or six modules – about 37.5 to 45 kWh: large all-electric homes, or a weak grid connection

An integrated energy optimiser lets new modules be added alongside existing ones later, and the 8.0 can be mixed with 6 kWh Neo modules in the same system.

Installing it

Floor standing for up to six, wall mounted for up to three

Each module is 800 × 295 × 235 mm and weighs about 65 kg, and they stack vertically, so plan the floor or wall for the full stack. The Neo ground-mount kit is the floor-standing option. IP66 with natural convection cooling and a −20 to +55 °C operating range, so it can live outside.

What else the system needs

  • The SigenStor Neo Energy Controller – it is not a battery for the original SigenStor or a third-party inverter
  • Installation by a qualified installer, and DNO notification under G98 or G99 depending on the inverter
  • Monitoring and safety built in: active and passive fire-prevention measures protect the battery system
Part numbers
Sigenergy SigenStor Neo Battery 8.0 kWhSIG-STOR-NEO-BAT-8.0
IP66 RatedBuilt for UK weather conditions