Sigenergy Sigenstor Batteries 30.0 kWh with LED (3 x 9.0 kWh)
Sigenergy Sigenstor Batteries 30.0 kWh with LED (3 x 9.0 kWh)
Sigenergy Sigenstor Batteries 30.0 kWh with LED (3 x 9.0 kWh)
Sigenergy SigenStor BAT — 314 Ah cells, 10,000 cycles and a genuine 100 % depth of discharge.
A home battery stores the solar your house does not use at the moment it is generated, and gives it back in the evening. What decides whether that is worth doing is not the headline capacity but three numbers together: how much of the pack you may actually use, how fast it will charge and discharge, and how many cycles it is good for.
Please read before ordering
| 3 x SIG-STOR-BAT-10.0 | Sigenergy Sigenstor Battery 9.04 kWh with LED | |
About the Sigenergy SigenStor BAT
The Sigen Battery is unusual on all three counts. The cells are 314 Ah and rated for 10,000 cycles, the depth of discharge is 100 % rather than the 90 – 95 % most packs quote, and there is a battery optimiser inside each module, which is what lets old and new modules be mixed in one stack when a system is expanded years later.
It is part of the SigenStor tower rather than a box on the wall: the Energy Controller sits on top, one to six battery modules under it, and the whole column is IP66 and convection cooled with no fans.
Sigenergy quote the usable capacity separately from the total — 5.84 kWh of 6.02, or 8.76 of 9.04 — which is the honest way round and the pair of numbers to compare against other brands.
What each stack size gives you
One controller takes one to six modules. Using the 6.02 kWh module, that is:
Which inverter will run this battery?
This is a stacking module for a SigenStor tower, 300 – 600 V on a single-phase controller and 600 – 900 V on a three-phase one.
It goes under a SigenStor Energy Controller, one to six modules per controller, and nothing else: this is a closed system. A Sigen Hybrid SP2 or TP2 inverter can also drive it, but only through a SigenStor BC battery controller, which is a separate part.
Hybrid inverter platforms in our range that take this architecture:
Inverters we stock that will run it:
Stack rules, cabling and what else the job needs
The details that decide whether this battery suits the system:
- One to six modules per Energy Controller. The controller decides the window: 300 – 600 V on single phase, 600 – 900 V on three phase.
- Sigenergy rate these modules at 100 % depth of discharge, and the usable figure they publish is about 97 % of the total — 5.84 kWh of 6.02, or 8.76 kWh of 9.04. Design to the usable figure.
- Modules may be mixed old and new thanks to the optimiser in each one, so a stack can be expanded years after it was installed.
- Charge and discharge is 3,000 W per 6.0 module and 4,600 W per 10.0, with a ten-second peak of 4,500 W and 6,900 W.
- 767 × 270 × 265 mm per module. 62 kg for the 6.0 and 78 kg for the 10.0 — a two-person lift either way.
- Floor standing or wall mounted, IP66, convection cooled, −20 to +55 °C.
- A Sigen Hybrid SP2 or TP2 needs a SigenStor BC battery controller to connect to these modules. A SigenStor EC does not.
- Recharge the battery within seven days of a full discharge to keep it healthy — that is Sigenergy's own instruction, not a suggestion.
Where this battery earns its place
The SigenStor BAT is specified most often for these jobs.
Things worth knowing about this listing
- The module Sigenergy call the 10.0 holds 9.04 kWh, of which 8.76 kWh is usable. The capacity figures on this page are the datasheet's.
- Recharge the battery within seven days of a full discharge. That is Sigenergy's instruction for keeping the pack healthy, not a suggestion.
Sigenergy 3 x 10.0 technical data
Questions we get asked about this inverter
Which inverter does it work with?
A SigenStor Energy Controller, single or three phase, with one to six modules per controller. A Sigen Hybrid SP2 or TP2 can also use it through a SigenStor BC battery controller. It will not work with another manufacturer's inverter.
Is the depth of discharge really 100 %?
Yes — Sigenergy rate these modules at 100 % DoD and publish the usable figure separately: 5.84 kWh of a 6.02 kWh module, 8.76 kWh of a 9.04 kWh one. The small difference is the reserve the BMS keeps.
Can I add modules later?
Yes, and unusually you can mix them with the original ones, because each module has its own optimiser. Up to six per controller.
How long will it last?
The cells are rated at 10,000 cycles at 0.5C and 25 °C to 60 % state of health, which for a daily cycle is a very long time.
Does it need anything else?
A SigenStor Energy Controller, and the base the stack sits on. If you are pairing it with a Sigen Hybrid SP2 or TP2 rather than an EC, you also need a SigenStor BC.
Documents, advice and trade pricing
Every datasheet, certificate, installation manual and warranty document we hold for this product is in the Documents tab below. See the rest of our battery range, our hybrid inverters and our solar panels, or email sales@clearraysolar.com if you would like us to check a battery and inverter pairing before you order.
Usable energy is the nominal capacity multiplied by the depth of discharge, and both figures are in the Technical Specifications. Most current lithium batteries allow 90% or more.
It needs to appear on your inverter manufacturer's approved battery list and the voltage ranges have to match. Send us your inverter model and we'll confirm compatibility before you order.
Most systems stack in modules up to a maximum number of units per installation, given in the datasheet. Keep to the same model, and buy the full stack together where budget allows.
Only where the IP rating and operating temperature range allow it - both are in the Technical Specifications. Cold reduces usable capacity, so a garage or utility space is usually the better location.
Yes, where the inverter supports timed or forced charging. Paired with a time-of-use tariff this is often the quickest route to a shorter payback.
Warranty terms, and the throughput or cycle count they are based on, are listed under the Warranty tab and in the manufacturer documentation.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
- Protection Devices
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.
