Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White
myenergi Zappi Single Phase EV Charge Point 7kW Type 2 Tethered White
The myenergi zappi is a 7 kW electric vehicle charge point, supplied with type 2 tethered, 6.5 m cable.
Specification
| Rated power | 7 kW |
| Phases | Single phase |
| Connector | Type 2 tethered, 6.5 m cable |
| Colour | White |
| Charging modes | ECO, ECO+ and FAST |
| Charging current | 6 A to 32 A, variable |
| Charge mode | Mode 3 (IEC 61851-1) |
| Dynamic load balancing | Yes, limits current drawn from the supply or the grid |
| Integral protection | 6 mA DC residual current detection, RDC-DD to EN 62955 |
| Metering accuracy | Class B (1%) of EN 50470 |
| Connectivity | Built-in WiFi 2.4 GHz 802.11 b/g/n, Ethernet port, 868/915 MHz wireless |
| OCPP | OCPP 1.6J via cloud |
| Grid current sensor | 100 A maximum primary current, 16 mm maximum cable diameter |
| Display | Graphical backlit LCD |
| Standby power consumption | 3 W |
| Dimensions (H × W × D) | 438 × 282 × 122 mm |
| Protection degree | IP65 |
| Impact resistance | IK10 |
| Operating temperature | −25 °C to +40 °C, out of direct sunlight |
| Enclosure material | PC / ASA |
| Mounting | Indoor or outdoor, permanent mounting |
| Supply cable entry | Rear or bottom |
| Compliance | CE and UKCA; EN IEC 61851-1, EN IEC 61851-21-2, EN 300220-1/2, EN 300328, EN 301489-1/3/17 |
| Warranty | 3 years (36 months), extendable to 5 years |
Installing an EV charge point in the UK
A home charge point is a fixed electrical installation and must be installed by a competent person to BS 7671. Two questions decide most of the job. First, does the unit have integrated PEN fault protection? On a TN-C-S (PME) supply that is what removes the need for an earth rod and the groundworks that come with it. Second, can the existing supply carry another 32 A? That is what load balancing exists to manage — the charger backs off when the house is drawing heavily, instead of taking out the main fuse.
Every charge point sold in Great Britain must also meet the Electric Vehicles (Smart Charge Points) Regulations 2021, which require default off-peak charging hours, a randomised start delay, and measures against unauthorised access.
Additional suggested items
Usually ordered at the same time:
- myenergi harvi - energy harvesting wireless sensor — wireless CT sensor, so no signal cable is needed back to the consumer unit
- 6mm2 Five Core Cat5e EV Ultra Cable with SWA Sleeve - 10m — power and Cat5e data in one armoured cable, for the run out to the charger
- myenergi hub - monitoring remote control unit — adds remote monitoring and control through the myenergi app
Datasheets, installation manuals and declarations of conformity are in the Documents tab below. See the rest of our ev charging range, or contact our sales team at sales@clearraysolar.com for trade pricing.
Build your complete solar system
Everything you need in one place.
- Inverters
- Batteries
- Mounting Systems
- Cabling & Accessories
- Protection Devices
Delivery times vary by region:
- UK — 1-2 business days
- Highlands & Islands — 1-2 business days
Returns accepted within 14 days of delivery for unused items in original packaging.
