DEKS Multi Cable Solar Flashing BattleShip Perform, 14 Cable Entry
The DEKS SolarDek BattleShip is a multi cable solar flashing that takes up to 14 cables through the roof under one weatherproof boot. Each cable has its own entry point in the black EPDM boot. That stops cables rubbing on each other or on the roof covering, and keeps the entry neat when PV, battery, EV and data runs all go in at one place.
This is the Perform version. Its lead-free base is very workable and is shaped by hand to the tile or slate. DEKS designed it for older or difficult roofs, where a self-adhesive base would struggle to stick.
When to choose the Perform base
Choose Perform for roofs that are weathered, damp or prone to moss, where adhesion is unreliable. The base is dressed to follow the profile of the tiles, so the seal comes from a close mechanical fit rather than a glued bond. On a clean, new roof the FastFlash version is quicker, because its butyl backing sticks straight down.
Cables and roofs
DEKS list the BattleShip range for cable diameters of 0-7 mm or 0-20 mm and for roof pitches from 0° to 45°. It suits solar PV, communications and EV installations. This Perform base is listed for tile and slate roofs.
Order alongside
-
Deks Fast Flash 370mm x 5m Roll - Black
Lead-free flashing roll from the same maker, for dressing around other roof penetrations on the job.
-
SolarDek Panel Drain 30mm
Another SolarDek part for the same array, to let water drain from the panel frames.
Other cable entries
Smaller or roof-specific alternatives when you don't need 14 entries.
-
DEKS Multi Cable Solar Flashing BattleShip FastFlash, 14 Cable Entry
The same 14-entry boot on a self-adhesive base, for clean new roofs, and also listed for metal roofs.
-
Deks Dektite Lead Multicable Solar Flashing (Tiled or Slate)
The established Dektite multicable flashing with a lead base, for tile or slate.
-
SolarDek TileFlash
A tile-roof flashing from the SolarDek range.
Questions on the BattleShip Perform
Up to 14, each through its own sealed entry.
Perform for old, damp or mossy roofs, where the base is shaped to the tiles. FastFlash for clean roofs, where its adhesive backing can bond.
No. DEKS describe the base as lead-free.
This Perform version is listed for tile and slate. The FastFlash version adds metal roofs to its list.
Mechanical
| Height | 0.5 m |
|---|
Most orders are delivered the next working day, subject to the delivery method, product availability, order processing time and destination. Next-working-day delivery is typical for standard deliveries and is not guaranteed for every order.
Pallet deliveries may take an additional day or so, depending on the products ordered, the delivery location and the carrier’s schedule. Special delivery arrangements may also require additional time.
Please refer to your tracking information for the latest delivery updates.







