{"product_id":"dy-powerbrick-plus","title":"Dyness Powerbrick Plus 16.07kWh Battery","description":"\u003c!-- clearray-added-v1 --\u003e\n\u003cdiv class=\"crx\"\u003e\n\n\u003cp class=\"crx-lede\"\u003eThe Dyness PowerBrick Plus packs 16.07 kWh into one low-voltage home battery, built on 314 Ah lithium iron phosphate cells at a nominal 51.2 V. Usable energy is 15.27 kWh at 95% depth of discharge, and it charges or discharges at up to 200 A, or 10.24 kW.\u003c\/p\u003e\n\u003cp class=\"crx-lede\"\u003eIts IP65 cabinet stands on the floor or hangs on a wall, indoors or out, with an aerosol extinguisher inside. Up to fifty can run in parallel, from 16 kWh to 803 kWh, under a ten-year Dyness warranty when linked to the inverter.\u003c\/p\u003e\n\n\u003ch3 class=\"crx-h\"\u003eThe PowerBrick Plus in figures\u003c\/h3\u003e\n\u003cdiv class=\"crx-facts\"\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e16.07 kWh\u003c\/b\u003e\u003cspan\u003eNominal energy per cabinet\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e15.27 kWh\u003c\/b\u003e\u003cspan\u003eUsable, 95% DoD\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e314 Ah\u003c\/b\u003e\u003cspan\u003eLiFePO4 cell capacity\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e51.2 V\u003c\/b\u003e\u003cspan\u003eNominal, 44.8–57.6 V working\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e200 A\u003c\/b\u003e\u003cspan\u003eMax charge and discharge\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e50 units\u003c\/b\u003e\u003cspan\u003eIn parallel, up to 803 kWh\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003eIP65\u003c\/b\u003e\u003cspan\u003eIndoor or outdoor siting\u003c\/span\u003e\n\u003c\/div\u003e\n  \u003cdiv class=\"crx-fact\"\u003e\n\u003cb\u003e≥8,000\u003c\/b\u003e\u003cspan\u003eCycles to 70% end of life\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3 class=\"crx-h\"\u003eCells, current and cold weather\u003c\/h3\u003e\n\u003cp\u003eDyness recommends 0.5C, 157 A or 8.03 kW, for everyday cycling and sets 0.64C (200 A) as the ceiling both ways, with a 300 A peak for two minutes at 25 °C. The cycle rating of 8,000 or more is measured at 0.2C and 95% depth of discharge, down to 70% of original capacity.\u003c\/p\u003e\n\u003cp\u003eThe standard cabinet charges between 0 and 55 °C. An optional self-heating version, marked by its own heating label, charges down to −20 °C; both discharge from −20 to 55 °C.\u003c\/p\u003e\n\n\u003ch3 class=\"crx-h\"\u003eFire suppression and BMS protection\u003c\/h3\u003e\n\u003cp\u003eThe aerosol extinguisher is designed to detect and put out a fire within five seconds. Dyness's own BMS balances every cell and guards against over-charge, over-discharge, over-current and abnormal temperature: above 210 A of charge it throttles current to 5 A or less, and above 305 A of discharge it sounds the buzzer and cuts output. A front LED flashes green on standby, yellow for a communication fault and shows steady red when a protection trips.\u003c\/p\u003e\n\n\u003ch3 class=\"crx-h\"\u003eInverters Dyness lists for it\u003c\/h3\u003e\n\u003cp\u003eThe datasheet names Solis, GoodWe, Growatt, SMA, Victron, Deye and APsystems; the manual's DIP switch table adds more. GoodWe, Solis, TBB, SAJ and SolaX run on the factory setting. SMA, Victron, Ingeteam, Solplanet, SOFAR, Deye, Hoymiles, APsystems, LuxPower, MUST, SOSEN and Afore need switch #3 on the master turned ON. Growatt SPH\/SPA over CAN, Axpert King, VMIII and MAX, and InfiniSolar use switch #2; Growatt SPF HVM-P, ES and WPV on RS485 use #2 and #3; Schneider Conext uses #1 and #3. Slaves keep the factory setting, and Dyness's own compatibility list has the final say.\u003c\/p\u003e\n\u003cp\u003eThe manual matches one cabinet to a 5 kW or 10 kW hybrid or off-grid inverter and two to a 15 kW model, with inverter settings of 57.6 V bulk, 56.5 V absorption, 56 V float and a 48 V or 5% SOC cut-off.\u003c\/p\u003e\n\n\u003ch3 class=\"crx-h\"\u003eSiting, mounting and parallel banks\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cb\u003eLocation:\u003c\/b\u003e shaded from sun, wind and rain, away from sea air, conductive dust, corrosive gas and flammables, ideally at 15–30 °C, with a dry powder extinguisher close by.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eWall:\u003c\/b\u003e solid brick or concrete of 100 mm or more, leaving over 300 mm clear at each side.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eFloor standing:\u003c\/b\u003e the cabinet's top still bolts to a wall support bracket, about 15 mm off the surface, on M6 expansion bolts at 6 Nm.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eWall hung:\u003c\/b\u003e the template's lower edge goes roughly 300 mm above the floor; the cabinet sits on a bottom bracket, bolted top and bottom.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eMoving it:\u003c\/b\u003e at 119 kg it can be wheeled by one person on the optional regulating wheels, slowly and upright.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cb\u003eParallel:\u003c\/b\u003e each unit runs its own pair of power cables to a distribution box; past twelve units, the 120 Ω resistor fits the last battery's CAN OUT port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 class=\"crx-h\"\u003eIn the box\u003c\/h3\u003e\n\u003cul class=\"crx-inc\"\u003e\n  \u003cli\u003e1 × PowerBrick Plus battery, 51.2 V \/ 314 Ah\u003c\/li\u003e\n  \u003cli\u003e1 × red positive power cable, 50 mm², 2,050 mm\u003c\/li\u003e\n  \u003cli\u003e1 × black negative power cable, 50 mm², 2,050 mm\u003c\/li\u003e\n  \u003cli\u003e1 × battery-to-inverter communication cable, 2,000 mm, RJ45 at both ends\u003c\/li\u003e\n  \u003cli\u003e1 × parallel communication cable, 2,000 mm, RJ45 at both ends\u003c\/li\u003e\n  \u003cli\u003e1 × earth wire, 6 mm², 500 mm\u003c\/li\u003e\n  \u003cli\u003e1 × 120 Ω CAN resistor\u003c\/li\u003e\n  \u003cli\u003e3 × M6 × 14 combination screws\u003c\/li\u003e\n  \u003cli\u003e6 × M6 × 80 expansion bolts\u003c\/li\u003e\n  \u003cli\u003e1 × positioning template\u003c\/li\u003e\n  \u003cli\u003e1 pair of battery brackets and 2 fixing brackets\u003c\/li\u003e\n  \u003cli\u003e1 × unlock piece\u003c\/li\u003e\n  \u003cli\u003eUser manual, letter to customer, warranty card and packing list\u003c\/li\u003e\n  \u003cli class=\"crx-no\"\u003eTop cover and the four regulating wheels: listed as optional, so check whether the configuration supplied includes them\u003c\/li\u003e\n  \u003cli class=\"crx-no\"\u003eM6 OT terminal for the earth connection, which the manual leaves to the installer\u003c\/li\u003e\n  \u003cli class=\"crx-no\"\u003eThe distribution box for a parallel bank, and the inverter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 class=\"crx-h\"\u003eWarranty: ten years, with conditions\u003c\/h3\u003e\n\u003cp\u003eCover runs ten years from installation or 180 days after dispatch from Dyness, whichever is earlier, and guarantees 70% of usable energy over that time or 47.375 MWh of throughput, whichever comes first. Without a communication link the battery cannot protect itself from deep charge or discharge, so the term drops to three years. Accessories, an incompatible inverter, relocation without Dyness's written consent and transport outside the original packaging all fall outside cover.\u003c\/p\u003e\n\n\u003ch3 class=\"crx-h\"\u003eQuestions on the PowerBrick Plus\u003c\/h3\u003e\n\u003cdiv class=\"crx-qa\"\u003e\n  \u003cdiv\u003e\n\u003cb\u003eCan it be installed outdoors?\u003c\/b\u003e\n    \u003cp\u003eYes, it is IP65, though the manual still wants it out of direct sun, wind and rain, on level ground.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv\u003e\n\u003cb\u003eIs the self-heating version worth having?\u003c\/b\u003e\n    \u003cp\u003eWhere the cabinet must charge below freezing, yes. The standard model stops charging under 0 °C but keeps discharging to −20 °C.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv\u003e\n\u003cb\u003eHow does the installer check communication?\u003c\/b\u003e\n    \u003cp\u003eDivide the maximum current the inverter shows by one module's maximum. If the result equals the number of cabinets, the link is good.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv\u003e\n\u003cb\u003eCan it be mixed with other batteries?\u003c\/b\u003e\n    \u003cp\u003eNo. Dyness rules out mixing makers, models, or old and new units.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv\u003e\n\u003cb\u003eHow should it be stored before commissioning?\u003c\/b\u003e\n    \u003cp\u003eBetween −10 and 35 °C, recharged above 80% every six months.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Dyness","offers":[{"title":"Default Title","offer_id":59647955697996,"sku":"DY-POWERBRICK-PLUS","price":1592.45,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1048\/7742\/4972\/files\/DY-POWERBRICK-PLUS.jpg?v=1793366223","url":"https:\/\/clearraysolar.com\/products\/dy-powerbrick-plus","provider":"ClearRay Solar","version":"1.0","type":"link"}